General Pump DSDBK1 Sandblasting Kit 3500 PSI
The General Pump DSDBK1 is a wet sandblasting kit that operates on the principle of suction-fed injection, combining sand with the water stream for abrasive cleaning with minimal dust.
- Components Included:
- A 20-foot, 1/4" diameter polyurethane hose for drawing abrasive material.
- A 16-inch aluminum sand wand (probe).
- A 24-inch water and sand outlet assembly featuring a permanent steel nozzle fixture.
- Mixing nozzle and seal.
- Compatibility: It is compatible with most professional-grade gas pressure washers, though a separate spray gun and zero-degree nozzle (matched to your pressure washer's GPM/PSI) are required for operation and are not included in the kit.
- Performance: The kit is praised by users for its effectiveness in removing paint and rust down to bare metal, even with pressure washers around 2500-2800 PSI
- Maximum Working Pressure: 3500 PSI
- Minimum Working Pressure: 1500 PSI
- Maximum Flow Rate: 8 GPM
- Minimum Flow Rate: 3 GPM
- Maximum Temperature: 200° Fahrenheit
- Hose Material: Polyurethane
- Hose Diameter: 1/4 inch I.D.
- Weight: 4.2 lbs
- Inlet Connection: 1/4" male quick-connect plug
- Compatible Media: Fine silica sand, medium to coarse grit, glass beads, or other abrasives
Prop 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer.
No one has reviewed this product!
Write a Review
