Titan 330 Airless Paint Sprayer Parts

Main Assembly Overview

Unnumbered exploded overview. Select replacement parts using the separate numbered drawings below.

Motor Assembly

Match the sprayer voltage. Brush/tube item 6 has standard and 230V choices. Complete motor kit item 11 is 700-070 or 700-084 for 230V. Housing/field item 8 and armature item 10 have no separate manual numbers.

No confirmed catalog match: Item 1 - 700-716 Screw, 1/4 x 1”; Item 2 - 704-101 Rear cover w/label; Item 3 - 700-063 Screw, 8/16 x 3/4”; Item 4 - 700-632 End cap; Item 7 - 700-766 Screw, 8-32 UN x 1.125; Item 11 - 700-070 Motor kit complete (includes items 3, 4, 5, 6, 8, 9, & 10); Item 11 - 700-084 Motor kit complete (230V units).

Stand / Skid Assembly

Left leg 704-092 includes items 2 and 4. Right leg 704-091 includes items 2, 5, and 6.

Gear Box Assembly

The manual lists voltage-specific motor starters, fuses, and power cords. Match your installed components and voltage. Items 41-43 are listed after the pictured callouts; items 42-43 are explicitly not shown. Screws and washers with shared part numbers appear under each applicable callout.

No confirmed catalog match: Item 1 - 700-511 Thrust washer; Item 2 - 700-732 Pinion gear; Item 3 - 710-120 Crankshaft/gear assembly; Item 6 - 761-132 Cover plate; Item 7 - 761-192 Insulator plate; Item 9 - 704-108 Screws; Item 12 - 704-042 Rear bearing housing; Item 13 - 704-044 O-ring; Item 15 - 700-593 Thrust washer; Item 17 - 765-067 Output pinion gear; Item 19 - 704-041 Pump housing; Item 20 - 700-645 Rubber boot; Item 24 - 700-657 Motor starter; Item 24 - 700-855 Motor starter (230V units) Assembly (P/N 704-100) 5 6 Description Quantity; Item 25 - 704-126 Washer; Item 27 - 700-686 Fuse, 5A(230V units); Item 29 - 704-128 Pressure switch; Item 30 - 704-130 Insulator plate; Item 31 - 704-104 Bracket; Item 32 - 765-054 Power cord; Item 32 - 700-280 Power cord (230V units); Item 32 - 200-209 Power cord (110V units); Item 33 - 704-102 Pressure control knob; Item 34 - 704-123 Spring; Item 35 - 704-114 Switch stem (includes item 36); Item 36 - 761-207 O-ring; Item 38 - 704-125 Washer; Item 39 - 704-126 Washer; Item 41 - 700-191 In-line fuse (230v units only); Item 42 - 761-726 Capacitor assembly (110V units, not shown); Item 43 - 761-735 EMI suppression core (110V units, not shown).

Suction Set Assembly

For complete suction set 704-100. Item 2 includes standard and optional solvent-resistant O-rings. Item 3 includes the retaining clip and the alternate retaining ring. Hose 700-1023 includes items 2, 3, and 6.

No confirmed catalog match: Item 3 - 704-129 Retaining ring (alternate, included in literature set); Item 5 - 755-135 Clip; Item Assembly - 704-100 Complete suction set assembly.

Pump Block Assembly

Valve assembly item 8 includes items 9-19. O-ring item 13 includes standard Viton and optional PTFE choices. The manual-listed installation tool 700-890 is not pictured.

No confirmed catalog match: Item 1 - 700-421 Filter housing; Item 5 - 704-080 Pump block; Item 6 - 704-131 Screw; Item 12 - 700-246 Valve housing.

Fluid Section / Pump

Complete fluid section 704-120 is item 1; 704-085 at item 1A includes the filter and PRIME/SPRAY valve and is listed without a separate drawing marker. Piston assembly 704-090 includes items 8-14. Packing kit 704-113 includes the starred parts, packing grease, and piston guide tool. Packing tool item 22 is not pictured.

No confirmed catalog match: Item 1 - 704-120 Fluid section complete; Item 1A - 704-085 Fluid section complete (includes filter and PRIME/SPRAYvalve assembly); Item 2 - 704-090 Piston assembly (includes items 8–14); Item 3 - 700-735 Connecting rod; Item 6 - 700-603 Upper packing; Item 15 - 730-509 Bushing; Item 17 - 730-510 Lower cage.