Titan Impact 410 Airless Paint Sprayer Parts
Find Titan Impact 410 repair parts for both the skid/stand 0532052 and wheeled cart 0532053.
Click a numbered marker to see the matching parts. OEM and aftermarket replacement choices are listed together where available. Match the part number and your sprayer version before ordering.
Jump to: Main Assembly · Fluid Section / Pump & Valves · Drive Assembly · Motor Assembly · Suction Set (Skid) · Cart Assembly · Skid / Stand Assembly
Main Assembly
Item 16: use 0532467A for the skid/stand version or 0532468A for the wheeled cart. Items 6-12 and 19 are cart parts. Items 4 and 13 refer to the motor and drive assemblies shown below.
Fluid Section / Pump & Valves
Item 27: use 704-054 for the skid/stand inlet housing or 730-511 for the cart inlet housing. Item 7 includes the standard O-ring and the optional PTFE O-ring. Packing repair kits appear at the end of the parts list.
Drive Assembly
Item 13: use 800-741 for the skid/stand power cord or 806-213 for the cart power cord. Electrical work should be performed by an authorized service center.
Motor Assembly
The motor brush kit appears at the end of the parts list. Electrical work should be performed by an authorized service center.
Suction Set (Skid)
For the skid/stand version. The optional solvent-resistant O-ring appears at the end of the parts list.
Cart Assembly
Wheeled cart assembly. The manual identifies the complete cart as 0551110.
Skid / Stand Assembly
For the skid/stand version. The manual lists left leg 0551526 in the main assembly and 805-213A in the stand assembly; match the reference for the assembly being serviced.
Impact 410 Part Numbers (532052, 532053)
The Impact® 410 is a high-performance electric airless sprayer designed for residential, property maintenance, and small commercial applications. Engineered for efficiency, it delivers smooth, consistent coverage with all standard architectural primers, paints, and coatings.
Compatible Spray Coatings: Stains, lacquers, enamels, latex, and other low- to medium-viscosity coatings.
When replacing parts for the Titan Impact 410, it is important to use the correct parts for your specific model sprayer. Locate the model number of your sprayer on the Titan Impact 410 manual or contact us if you are unsure what part you need. We’re here to help!
Questions & Answers
What materials can the Titan Impact 410 spray?
The Titan Impact 410 is designed to spray a wide range of coatings, including stains, lacquers, enamels, latex paints, and other low- to medium-viscosity coatings. It is ideal for residential, property maintenance, and small commercial applications.
How do I properly clean and maintain my Titan Impact 410?
To maintain peak performance, flush the sprayer with the appropriate cleaning solution after each use. For water-based coatings, use clean water; for solvent-based coatings, use mineral spirits or an approved solvent. Regularly check and replace filters, inspect hoses for wear, and lubricate the piston with Titan Piston Lube™ to extend the unit's lifespan.
What tip size should I use with the Titan Impact 410?
The Titan Impact 410 supports spray tips up to 0.021 inches, making it suitable for a variety of coatings. Choose the correct tip size based on your material’s viscosity—smaller tips (e.g., 0.011-0.015") for stains and lacquers, larger tips (e.g., 0.017-0.021") for latex paints.
What is the recommended hose length for the Titan Impact 410?
The Titan Impact 410 is compatible with hoses up to 100 feet in length. However, for optimal performance, a 50-foot, 1/4-inch airless hose is recommended, ensuring consistent pressure and minimal material flow restriction.